Каталог
Amplifiers for the video transmission over twisted pair
 Provides transfer of colour image video signal on twisted pair to 1000 m. Supports the possibility of multichannel transfer without distortions and high (from above 70 dB) suppression of an inphase hindrance in a range to 10 MHz. Has the built in protection against the induced impulses of high voltage.
|
Provides transfer of colour image video signal on twisted pair to 2400 m. Supports the possibility of multichannel transfer without distortions and high (from above 70dB) suppression of an inphase hindrance in a range to 10 MHz. Has the built in protection against the induced impulses of high voltage.
| |
 The economy decision for black-and-white and colour video signal transfer on twisted pair on the distance of 400 m
|
 The system of multichannel video signals reception on twisted pair in 19" creit allows to place to 24 channels of decoders in one case. The creit in height of 3U allows the installation in 19" rack. Adjustment and indication of the basic operating modes on the front panel is provided.
| |
 The transfer of 4 video signals together with power supply on the distance up to 400 m
|
 The set of amplifiers for video signal transfer TWIST-S is used for transfer of black-and-white and colour video signal on twisted pair (UTP, FTP, SFTP and similar) on distance to 1000 metres, depending on used cable type.
| |
 The set TWIST RGB 2x2 is used for transfer RGB video signal on twisted pair for distance of 200 m and its distributions between display devices.
|
With TWIST-LITE-16 sixteen amplifiers set for video transmission you can organize a multi-channel transmission of sixteen B/W or color video cameras over twisted pair UTP, FTP, SFTP, TPPEP, and a similar to distance up to 400 m depending on the type of cable.
| |
|
Four-channel amplifiers set for B/W or color images or video transmission over twisted pair.
|
Sixteen amplifiers set for video transmission in B/W and color video cameras and power over twisted pair multiple conductor cable
|
Amplified and switching devices
 The amplifier switching device is used for amplification and distribution of composit video signals from 16 independent inputs to two loadings (16 active dividers 1 х 2).
|
TWIST-VGA-DA4 - is the distributor of high-power 1:4 XGA video signal from any device or computer HDTV source. The device allows you to distribute RGBHV signal into four identical outputs on the 15-pin DSUB series of high density.
|
 VADISTOR-1Х24 distributor is used for distribution of sound or composit video signal to some outputs (up to 24). It can work on the inclusion scheme 2x12.
|
 The video signal distributor TWIST SW2x16 DB25 is used for distribution of two composit video signals to 16 independent outputs. The device can be used to check the video servers, in trading halls, both the exhibition and studio equipment for signal distribution between several consumers.
| |
 The active switching panel is used for convenient and fast connection of incoming video signals from TV cameras of systems of video surveillance.
|
Device video distributor VS1x2 is designed to divide a composite video signal into two loads with independent voltage control for each output.
|
Protection and power organization devices
 The induced impact voltage protection device (lightning protection) TWIST LGC is used with coaxial cable for video equipment protection against high-voltage impact overvoltage in a line, caused by electrostatic charges, lightning discharges, strong electromagnetic fields, high-voltage impact inducing.
|
 The impact power supply TWIST – PS12-1 is used for videocameras supply and also of various devices, especially exacting to quality of the voltage level, working in the long-term conditions.
|
 The power supply organizer TWIST PO12-2 is used for videocameras and other equipment supply by the stabilised voltage of 12V, and also protection of videocameras supply circuits against overvoltage. It can be used at the organisation of a remote multichannel videocameras supply in systems of TV security.
|
 The supply filter is used for suppression of hindrances from impact power supplies of a direct current. Possessing the high suppression of high-frequency components, it can be used in supply circuits of videocameras and the send-receive equipment.
|
Induced pulse voltage protection device (lightning protection) TWIST LG-485 is used to protect video equipment from high-voltage surge in the line caused by electrostatic charge, lightning, strong electromagnetic fields, high voltage pulse induction.
|